How to hard reset Tecno W4


Last Updated on December 14, 2020

You would want to reset your Tecno W4 either because it started to hang, slower in processing as a result of its low RAM size of 1GB, reset unlock code/pattern or you just want to clean space for app installations.

If you have been searching for a way to reset your Tecno W4 to its factory settings, then this guide is for you. To reset Tecno W4 is very simple unlike resetting Tecno Camon C8 or other Camon variants. Just take one step at a time.

ALSO READ: How to boost your Android phone from hanging, unexpected stop and more

How to hard reset Tecno W4

hard reset Tecno W4
Tecno W4 Recovery Mode / ChuksGuide

NOTE: Make sure you battery is charged at least 50% before continuing the steps. Both the volume button and  power buttons are situated at the same position, you have to be careful.

Steps:

  1. Turn off your Tecno W4 (Power off).
  2. Hold and press the Volume up button then Power button at the same time.
  3. Release your hands when the screen displays Tecno logo
  4. Use the volume up and down button to select navigate around the recovery options,.
  5. Select “Wipe data /factory reset”
  6. Press the power button to choose it
  7. Scroll to choose YES
  8. Now press Reboot System.
Wait till your phone boots, it may take it anyway. Your Tecno W4 should be reset to its factory settings. You can optionally wipe cache partition.

Other related hard reset posts


, ,

12 responses to “How to hard reset Tecno W4”

    • Power down your phone and start over again. You chose fastboot instead of recovery mode.

      To power down, disconnect the clip at the bottom of the battery joining your phone then connect again

  1. for how long does it takes to boot after performing the above steps. mine is flashing the tecno logo for ages

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.